TSW CabCam Improvements All-in-One v1.67 (2025)

The BR 110 is finally playable in rain and snow :) Thank you for this mod.

Thanks :) The Brake key is hidden behind the E-brake handle, but that's a price I'm willing to pay, just move the brake handle a little to reach it :D

Yes, excellent compromise. You can also activate it while standing, so no gameplay concerns.

Exactly :)

Awesome mod, any plans to do the ES44c4 from Cajon? The camera sits high and the wipers are small, so when it rains you cant really see infront of you as the wipers dont clear that much.

your the best!

Have you made the es44 in horseshoe cab view higher? if not I think the view needs to be higher as it seems too low. thanks

No, if you raise it you'll have a bad visibility in rain or snow. I've actually moved it back a little, but the position is still a bit higher than in my modded Cajon Pass ES44C4. Normally the driver sits about in the middle of the side windows.
It's probably the high control stand and the towered displays in HSC's ES44 that leads to the impression you're too low.

That makes sense. Thanks for the info

Embrace the 13 :) And thank you for making these mods for us all to enjoy and have a better gaming experience.

Y'all are very welcome, I Fear Not The 13, it's been in my life and my family's life for many years. As well as here again after checking the updates here, just this one mod showed me three updates, with a total of 16 and after clicking each one, I ended up with :)

More updates to go through.
I couldn't add an image to ya reply.

I Look forward to it, do you have the 187? some tried to give a few touch-ups, but it still looks like ya are sitting on the desk, that is if it can be changed. I tried searching for any that may have given it a once over. https://www.trainsimcommunity.com/search?query=br+187

Yeah, I saw and heard that sometime after getting it. all is good though, figured I would ask.

It will be included in the upcoming patch, got it for €7 in a bundle.

Good job !

Thanks!

is the ICE 3 viewpoint based on the enhancement pack by Nagiphaaa or a bit different? and if I understood it right, if I rename this to be sorted above the enhancement pack, the ICE 3 from KWG will then use the viewport of your mod instead of the EP because it uses that first?

yeah already did that and it worked fine but thanks still. :)

DTG rolled back their update. Mod still requires a workaround that prevents it from being used on TSW3.

This mod is now fully up to date with the latest DLC patches from DTG. If you are using an older version of the mod, the updated Vectron might not work correctly. Always use the latest version of my mod :)

please share instructions on how to change the location of the cameras in the cockpit

Join the TSC Discord - I won't do a tutorial here :)

idk why u keep updating this every few days its starting to get to the point of having to get rid of this mod because of it i feel its not worth using

yeah not for me sorry as a modder for ATS & ETS2 i dont do every 2 days updates

It's your choice. All you need to do is overwrite the pak, but if that's too much feel free to delete it.
I'm also modding ETS2 (just for my own use though).
Ironically just because modders don't update their mods the Steam forums are full of bug reports that are due to outdated or badly maintained mods. :)

The rotem camera rework was really needed, i was so tired of looking down to setup the cab. Many thanks!

Great mod!
Can you also do it for the Ge4/4 Rhb?

You can adjust the seat height as you like already on the Ge4/4. :)

No, not possible. That's core game code. And what you are describing has nothing to do with my mod.

But without that mod when "T" menu is toggled zooming camera is disabled. So it must be your mod thing.

Nope. That's the effect of GodMode's Zoomier Zoom, not my mod. :)

Excellent pack, you'de made the ICE1 usable now! Well done for the improvments to all the locos. Is there a way for some trains to not have the adjustments, the 323 and 158 i liked the prevouis cab view. Thanks!

Another update was necessary, as I just received a Steam update affecting Edinburgh Glasgow and the 385. Mod updated to v1.27 to reflect the changes.

I found a problem with the 385, windows are almost white and can't see the exterior.

Are you using other mods? The issue you are describing cannot be caused by my mod, as I'm not editing materials, only coordinates.

I tried removing all mods except this and godmode, also removed all ini settings but when this mod is active, the Class 385 has white windows. All the other cabs looks great.

Seems like I still got the nuclear tail light after using v1.30 with no other mods included, any clue what I should look at to figure out the issue?

Me the same it doenst work!

Eh no! Thats not the case.... You now writing that I am talking about the 425 from Rhein Ruhr, but that is not the case! It's really about the BRO version

Same as Xander, I used the BOG one that only run on BOG

I don't know. Probably another mod you are using is interfering with mine.

I'm testing with no other mod but this one only (still have custom .ini)

Todays winter core patch needs the mod to be updated, hang in there. Will go out tonight.

v1.30 is what we needed for the recent BRO 425 headlight fix mod which probably had a compatibility issue with this. even though I don't own BRO I miiiight buy it at some point, and a TOD4 425 would come in handy anyways (idk why though lmao the TOD3 one works well enough) but thanks!

will the BRO 425 light overhaul also be available for the NRM 425?

Hello, dear Spikee1975! I really want to draw your attention to the fact that when the light in the locomotive cabin is turned on, when viewed from an external camera, it looks completely unreal! The cabin windows are usually too transparent, the interior lighting or the cabin textures themselves are too bright, and the camera's appearance looks unnatural! Is there any way to fix this? This is bad taste or incompetence due to the lack of an artist in DTG, but they will never fix it, so many locomotives have this bug with lights and cabin windows.

I mean, most of the locomotives in the game. There is 1 locomotive with good glasses Cajon Pass BNSF SD 40-2 look at what kind of glass it has and what the interior looks like from an external camera through the glass and what transparency there is and compare it with all the other locomotives in the game and you will understand what I'm talking about. Thanks for your attention!

I've seen exactly the same thing and haven't got as far as testing it mod free, but I suspect it's yet ANOTHER bug with the game. The NPC isn't disappearing when you sit in the seat and I'd be very surprised if a mod that simply altered camera co-ordinates could prevent that happening. It only happens in this one scenario and if you look in the external view there are two characters in the seat. It maybe that this mod has unmasked a bug that is hitherto unseen because the player has always blocked out the NPC. It’s a PITA but all I can suggest is remove the mod to play this scenario and put it back in for everything else.

The scenario is playable :) But I would not be surprised if it's not another Game Bug, nevertheless, I figured Let you both know what is happening as I see it. And yes it's not that much of a hassle to remove the mod to do one or two scenarios.
I just noticed that I neglected to mention that the choose from the list that pops up was screen-capped from TSW3 as this doesn't show up in TSW4. Thanks for getting back to me. But it is kind of funny when ya think about it, no sense in crying :) Oh yeah If y'all want me to remove the images let me know.

This is entirely Spikee’s mod, I’m just an interloper. Did you say it works ok when the mod is uninstalled? Maybe Spikee could take a look at it.

With the mod removed, No Eye & Tongue :) took a few screencaps.

Things happen, it's the life of modding, as for the second man I will have a look-see and grab a few screencaps, let me know if I should take the images down to keep the thread clean. This was not the game being buggy then?
I was going to do a scenario like the two-faced guy :), I wanted to ask you first because I don't want to do ya wrong, would rather promote the mod and I would have a disclaimer saying all was fixed and show it. Merry Christmas.

I hear ya, and it's no biggie, I didn't expect you to go through all this, sometimes it's just not worth it, and hear ya and can understand. The mod can be deactivated when doing either of those scenarios on Platforms 8 and 10 and I just did some of a timetable service with a 323 and took over from the AI NPC with no issues at all. There is something that is just off with the 166 and "Down The Line Scenario" The pop choice of routes to take does not show in TSW4 & Yet in TSW3 it does most times the is. I appreciate what you have done and the time you took to make this mod, not to mention troubleshoot it now. Heck, you have done more than you need to with this one, and if I could tip all y'all modders I would, I can live with it as is.

The introductory scenario on GWE was also broken for years, not recognising you taking a seat. It seems they are set up differently.

So it would seem, and TSW4 is just helping to bring the issues to light even more so on this one, that is a shame I kinda like the 166, the way it sounds and rides. so much more could have been done with it. Who knows if they released the source code like a few others have, well then maybe. Wish I could have stayed with modding but life had its way and those days are way beyond me now. That is why I try to give back what I can in my own way.

You're a good spirited nice chap Dre.

Thank you, I do appreciate your kind thoughts, and I try my best to be.

is it possible for you to lower the caab view for the mbta cab car? it's way too high up when compared to real life.

You mean the CTC-3? I've worked on this already, I think it has good view. If I lower it, you can't see the cab-signalling displays...

were to install this mod on the TSW4 from gamepass?

I don't have that, so I don't know. I'm using the Steam version.

ouch

On the gamepass version, each DLC has its own folder. By default it should be in C:\XboxGames. For e.g., I have mine here: C:\XboxGames\Metrolink Antelope Valley Line\Content\TS2Prototype\Content\DLC.

Nuwanda, does the mod work with the Gamepass version?

the West Somerset Railway update breaks the class 33 (window view is bad now )probably other trains on that route too did not check the rest

New update is just being uploaded :) (WSR Class 33, 47 and 52 affected)

cool :)

Hey I dunno if this mod already does this but can I get a driver POV cam while an AI is driving the train?

Not possible. Sit in the secondman's seat :)

If convenient, can you provide version v1.29 again?
It runs well on my TSW3, at least working on CRR SD40
The latest v1.37 version will cause issues with my game, such as CSX GP38-2/UP SD70ACe/UP SD40-2, which will disappear after entering the game
If you don't understand what I'm saying, feel free to ask me anytime, because my native language is not English

I'm on the discord so I can reach out if preferred, but I was wondering if this effected, or on request, might be able to include, the Underground '72 stock? It'd be nice if the speedo was within the default field of view.

That would only require you to look down a bit, no change of camera position. I'll not make changes to the default rotation, you're always looking straight forward.

Hello, yours new version of mode is crasing the game. Until update which is 2hours old it didn't crash.

Oh, I will try that new one. It crashes on startup, without your mod nothing. Afterall, I will check new version.

Now it is okay :D Thanks!

Glad it's sorted, enjoy!

Hey, is it possible to fix the engine room lights on the SBN 1116 like you did with the clipboard light?
would be nice :)

Thank you! :)

Please can you check the Class 800 Azuma? They have changed also for the UK stuff for a few weeks ago! Thanks :)

Thanks! :)

since you can now add unfoldable spoiler fields in mod descriptions, I just wanna recommend that you could throw the changelog in there so we don't have to scroll that far to get to the download ;)

Good idea! Done.

looks much better, thanks :)

Full compatibility patch is out - I've extracted all paks that were affected by the UK and DE updates, and updated the files accordingly. Should only need another update when DTG decides to release patches again.

Nope.

Okay, thank you for getting back to me.

Many thanks for this Spikee.

Much appreciated, glad I can help make the game a little better.

Spikee, is this mod incompatible with any other mods? The past couple versions haven't been working for me, including the latest version

Thanks man, really grateful that somebody in the community is making QoL changes the game desperately needs.

Thanks for appreciating!

Does this still have the 465 camera patch? I don't see a difference when using the mod.

Yes it does. Sounds like you have another mod interfering, that's not in my hands.

I took out all other mods and it looks the same. I'm not sure if something is just wrong with my game.

how can i use this mode with epic games?

Sadly I don't know. I would need a copy of the game from Epic, as I don't know how the file structure works on that version. I know that won't help, but for the full experience I can only recommend buying from Steam, as all mods are working on there.

Great stuff, thanks! One of the absolutely necessary mods.

Thanks! It was born out of frustration and deciding not to be depending on DTG and waiting for them to address feedback :)

I have proglem with class 385, windows are white and i cant see the exterior. I tried deactivating other mods except this one and i found out it causes proglem to the window

That is not caused by my mod, unless you have a very old version. In that case, redownload it.

Hi with the latest tsw update the mod breaks the LZB "B" indicator in the BR 101 Expert.

I have just finished updating the mod with the newest data - check back in a minute :)

It does work again. Thanks :)

The mod doesnt seem to work for me
its in this folder/path: B:\SteamLibrary\steamapps\common\Train Sim World 5\WindowsNoEditor\TS2Prototype\Content\DLC
but i dont see any changes camera angels or improved lighting
pls help!

Can you add camera updates for the new MBTA route?

I do not have the route and do not plan on getting it unless in a deep sale.

Hi, Class87 of WCML is planned ?

Done.

Thank you for update

Can't get the mod to work atm, I removed all my other mods and it still didn't work.